TBA120 table covering 1,22 x 10 m, beige
- Product number:
- 02-0102-90003
- In stock:
Field of application:
Individually cuttable coverings as basic equipment for an ESD-protected workplace
Color(s): Surface beige; Undersurface black
Hardness (value | unit | standard):
75 | shore A | ISO 7619
Main features:
low-reflection surfacegood scratch resistancelimited protection against hard impactscoefficient of friction reduces slipping effectsconductive undersideconductive topside
Manufacturer information:
Production tolerances +/- 10 mm
Corrosion resistant:
-1
Material Raw/material group:
two-layer synthetic rubber
Surface resistance (value | unit | standard):
Top side 1 x 10e8 | Ohm | bottom side 1 x 10e4 | Ohm | IEC 61340-2-3
Technical note:
The mats and pads are specified for use in industrial manufacturing or an EPA. The usual ambient temperatures should be between 0° and +35°C. The coverings should be used on dry surfaces. Regular maintenance cleaning should only be carried out with ESD cleaner. Any required chemical resistance must be tested before use. For applications that do not fall under these conditions, additional description: heat and solder resistant.
Individually cuttable coverings as basic equipment for an ESD-protected workplace
Color(s): Surface beige; Undersurface black
Hardness (value | unit | standard):
75 | shore A | ISO 7619
Main features:
low-reflection surfacegood scratch resistancelimited protection against hard impactscoefficient of friction reduces slipping effectsconductive undersideconductive topside
Manufacturer information:
Production tolerances +/- 10 mm
Corrosion resistant:
-1
Material Raw/material group:
two-layer synthetic rubber
Surface resistance (value | unit | standard):
Top side 1 x 10e8 | Ohm | bottom side 1 x 10e4 | Ohm | IEC 61340-2-3
Technical note:
The mats and pads are specified for use in industrial manufacturing or an EPA. The usual ambient temperatures should be between 0° and +35°C. The coverings should be used on dry surfaces. Regular maintenance cleaning should only be carried out with ESD cleaner. Any required chemical resistance must be tested before use. For applications that do not fall under these conditions, additional description: heat and solder resistant.